Engine - GM (19433035)
Engine - GM (19433035)
- GM
- 19433035
- 19332532, 19355722, 19418657, 19432114
Details
- Brand:
- SKU:
19433035
- Description:
OUR LATEST TWIST ON THE BIG-TORQUE 383 STROKER!
When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination, which uses a long, 3.800-inch stroke with 4.000-inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower.
Chevrolet Performance's stroker crate engine is part of our range of Street Performance engines and is designed for optimal performance on the street and the occasional trip down the quarter-mile. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 lb.-ft. of seat-tugging torque.
Like all of our crate engines, it is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high-flow, aluminum intake manifold. Use the Holley 770-cfm four-barrel carburetor, P/N 19170093 to achieve the listed horsepower and torque ratings.
TECH SPECS
Part Number: 19332532 / 19355722
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 383
Bore x Stroke (in): 4.005 x 3.800
Block (P/N 88962516): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12489436): Forged steel
Connecting Rods (P/N 19332460): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Valve Lift (in): .509 intake / .528 exhaust
Camshaft Duration (@.050 in): 222° intake / 230° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36° Total at 4,000 rpm
Maximum Recommended rpm: 6,000
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires addition of carburetor, ignition, fuel pump, thermostat housing, thermostat, and starter (not included)
- 435 horsepower rating achieved during GM testing with high-rise single-plane intake manifold (P/N 12496822) and a 770-cfm carburetor with vacuum secondaries (P/N 19170093)
- Chevrolet Performance dual-plane intake manifold (P/N 12366573) may be used to avoid hood clearance problems, but peak power may decrease by approximately 15-20 horsepower
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Replaces:
19332532, 19355722, 19418657, 19432114
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - MSRP: $12,577.44
- Discount: $2,012.39 (16% off)
- Sale Price: $10,565.05
- GM
- 19433035
- 19332532, 19355722, 19418657, 19432114
Details
- Brand:
- SKU:
19433035
- Description:
OUR LATEST TWIST ON THE BIG-TORQUE 383 STROKER!
When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination, which uses a long, 3.800-inch stroke with 4.000-inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower.
Chevrolet Performance's stroker crate engine is part of our range of Street Performance engines and is designed for optimal performance on the street and the occasional trip down the quarter-mile. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 lb.-ft. of seat-tugging torque.
Like all of our crate engines, it is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high-flow, aluminum intake manifold. Use the Holley 770-cfm four-barrel carburetor, P/N 19170093 to achieve the listed horsepower and torque ratings.
TECH SPECS
Part Number: 19332532 / 19355722
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 383
Bore x Stroke (in): 4.005 x 3.800
Block (P/N 88962516): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12489436): Forged steel
Connecting Rods (P/N 19332460): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Valve Lift (in): .509 intake / .528 exhaust
Camshaft Duration (@.050 in): 222° intake / 230° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36° Total at 4,000 rpm
Maximum Recommended rpm: 6,000
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires addition of carburetor, ignition, fuel pump, thermostat housing, thermostat, and starter (not included)
- 435 horsepower rating achieved during GM testing with high-rise single-plane intake manifold (P/N 12496822) and a 770-cfm carburetor with vacuum secondaries (P/N 19170093)
- Chevrolet Performance dual-plane intake manifold (P/N 12366573) may be used to avoid hood clearance problems, but peak power may decrease by approximately 15-20 horsepower
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Replaces:
19332532, 19355722, 19418657, 19432114
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Findlay Auto Parts
Findlay Auto Parts is one of the largest US suppliers of genuine GM OEM parts & accessories. We operate out of the #1 volume Chevrolet dealership in Nevada, which allows us to offer you one of the largest selections of Buick, Cadillac, Chevrolet, and GMC parts at below factory prices. Sourced directly from the manufacturer, genuine parts are designed with exceptional quality, durability, and perfect fit in mind. Each part undergoes rigorous testing to ensure it meets the highest safety and performance standards, so you can trust it to perform just like the original.
GM
FAQs About Engine - 19433035
How can I check if this part will fit my vehicle?
To check if Engine 19433035 will fit your vehicle, use our fitment tool on the top of the page.
What's the return policy?
Returns must be requested within 30 days of receipt by calling 1-844-734-8539 or emailing customer service here. Include a copy of the invoice with the return. Parts must be resaleable, in original packaging, and not used, installed, or electrical. A 15% restocking fee applies. Special ordered parts are non-refundable. Defective parts must be reported within 15 days for a potential warranty refund. We reserve the right to refuse returns that don't meet these criteria.
Does this Engine come with a warranty?
Most GM Genuine OE parts and ACDelco Gold parts are covered by a 24-month/unlimited-mile warranty, while ACDelco Silver parts have a 12-month/unlimited-mile warranty. A limited lifetime warranty applies to select GM OE parts like chassis components, electric fuel pumps, and radiators, among others. Additional warranties include coverage for batteries, collision products, powertrain components, and EV chargers, each with specific terms. For full details about your product warranty, feel free to contact us.
How fast will my order ship?
In-stock orders ship within 24 hours, with weekend orders processed the next business day. Out-of-stock items typically take 2-3 days to arrive from the manufacturer, though some may take up to 5-6 days. Ground shipping usually takes 2-7 days, and overnight shipping is available for an additional cost. Oversized shipments may incur extra fees, with approval required before shipping. We do not ship internationally or offer COD orders. Shipping estimates may change due to size or weight adjustments, and customers will be notified of any changes before shipment. If a part is backordered or discontinued, we will do our best to locate it quickly.
Is there an expert I can talk to about this part?
Yes, our knowledgeable parts specialists are available to assist you with any questions or concerns. Contact our customer service team at 1-844-734-8539 or email us at [email protected] for any questions.