Engine - GM (19433041)
Engine - GM (19433041)
- GM
- 19433041
- 19351532, 19355668, 19417576, 19419205, 19432104
Details
- Brand:
- SKU:
19433041
- Description:
CHEVROLET PERFORMANCE'S ICONIC 350-BASED "ZZ" ENGINE FAMILY CONTINUES THE LEGACY
Chevrolet Performance's new ZZ6 delivers more power than any 350 Small-Block ever installed in a production vehicle. Rated at 405 hp and 406 lb.-ft. of torque, it derives its range-topping performance from unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm.
The cylinder head casting is based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs deliver greater high-rpm performance and durability. Their egg-shaped profiles have less reciprocating mass in motion, require less spring pressure for greater valve control and handle valvetrain stresses more efficiently. They allow the ZZ6 to rev higher to make the most of every cubic inch of air drawn through it.
The ZZ6 also uses an aggressive hydraulic roller camshaft that supports the engine's high-rpm airflow capability while maintaining excellent low-speed drivability. This Base crate engine kit includes the intake manifold, distributor, water pump, damper and flexplate - and the distinctive, racing-inspired valve covers that distinguish this crate engine as the latest in the ZZ legacy!
TECH SPECS
Part Number: 19351532
Engine Type: Chevy Small-Block
Displacement (cu in): 350
Bore x Stroke (in.): 4.000 x 3.48
Block (P/N 10243870): Cast-iron with 4-bolt Mains
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Forged powder metal
Pistons (P/N 10159436): Hypereutectic aluminum
Intake Manifold (P/N 12496822): Single-plane aluminum
Carburetor (P/N 19170093): 770 cfm Holley
Camshaft (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake/.510 exhaust
Camshaft Duration (@.050 in): 208° intake/221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (inches): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 nominal
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Distributor (P/N 93440806): HEI
Ignition timing: 36? Total @ 4,000 rpm
Maximum Recommended RPM: 5,800 rpm
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19351532, 19355668, 19417576, 19419205, 19432104
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - MSRP: $11,878.36
- Discount: $1,900.54 (16% off)
- Sale Price: $9,977.82
- GM
- 19433041
- 19351532, 19355668, 19417576, 19419205, 19432104
Details
- Brand:
- SKU:
19433041
- Description:
CHEVROLET PERFORMANCE'S ICONIC 350-BASED "ZZ" ENGINE FAMILY CONTINUES THE LEGACY
Chevrolet Performance's new ZZ6 delivers more power than any 350 Small-Block ever installed in a production vehicle. Rated at 405 hp and 406 lb.-ft. of torque, it derives its range-topping performance from unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm.
The cylinder head casting is based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs deliver greater high-rpm performance and durability. Their egg-shaped profiles have less reciprocating mass in motion, require less spring pressure for greater valve control and handle valvetrain stresses more efficiently. They allow the ZZ6 to rev higher to make the most of every cubic inch of air drawn through it.
The ZZ6 also uses an aggressive hydraulic roller camshaft that supports the engine's high-rpm airflow capability while maintaining excellent low-speed drivability. This Base crate engine kit includes the intake manifold, distributor, water pump, damper and flexplate - and the distinctive, racing-inspired valve covers that distinguish this crate engine as the latest in the ZZ legacy!
TECH SPECS
Part Number: 19351532
Engine Type: Chevy Small-Block
Displacement (cu in): 350
Bore x Stroke (in.): 4.000 x 3.48
Block (P/N 10243870): Cast-iron with 4-bolt Mains
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Forged powder metal
Pistons (P/N 10159436): Hypereutectic aluminum
Intake Manifold (P/N 12496822): Single-plane aluminum
Carburetor (P/N 19170093): 770 cfm Holley
Camshaft (P/N 10185071): Steel hydraulic roller
Valve Lift (in): .474 intake/.510 exhaust
Camshaft Duration (@.050 in): 208° intake/221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (inches): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.72:1 nominal
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Distributor (P/N 93440806): HEI
Ignition timing: 36? Total @ 4,000 rpm
Maximum Recommended RPM: 5,800 rpm
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19351532, 19355668, 19417576, 19419205, 19432104
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Findlay Auto Parts
Findlay Auto Parts is one of the largest US suppliers of genuine GM OEM parts & accessories. We operate out of the #1 volume Chevrolet dealership in Nevada, which allows us to offer you one of the largest selections of Buick, Cadillac, Chevrolet, and GMC parts at below factory prices. Sourced directly from the manufacturer, genuine parts are designed with exceptional quality, durability, and perfect fit in mind. Each part undergoes rigorous testing to ensure it meets the highest safety and performance standards, so you can trust it to perform just like the original.
GM
FAQs About Engine - 19433041
How can I check if this part will fit my vehicle?
To check if Engine 19433041 will fit your vehicle, use our fitment tool on the top of the page.
What's the return policy?
Returns must be requested within 30 days of receipt by calling 1-844-734-8539 or emailing customer service here. Include a copy of the invoice with the return. Parts must be resaleable, in original packaging, and not used, installed, or electrical. A 15% restocking fee applies. Special ordered parts are non-refundable. Defective parts must be reported within 15 days for a potential warranty refund. We reserve the right to refuse returns that don't meet these criteria.
Does this Engine come with a warranty?
Most GM Genuine OE parts and ACDelco Gold parts are covered by a 24-month/unlimited-mile warranty, while ACDelco Silver parts have a 12-month/unlimited-mile warranty. A limited lifetime warranty applies to select GM OE parts like chassis components, electric fuel pumps, and radiators, among others. Additional warranties include coverage for batteries, collision products, powertrain components, and EV chargers, each with specific terms. For full details about your product warranty, feel free to contact us.
How fast will my order ship?
In-stock orders ship within 24 hours, with weekend orders processed the next business day. Out-of-stock items typically take 2-3 days to arrive from the manufacturer, though some may take up to 5-6 days. Ground shipping usually takes 2-7 days, and overnight shipping is available for an additional cost. Oversized shipments may incur extra fees, with approval required before shipping. We do not ship internationally or offer COD orders. Shipping estimates may change due to size or weight adjustments, and customers will be notified of any changes before shipment. If a part is backordered or discontinued, we will do our best to locate it quickly.
Is there an expert I can talk to about this part?
Yes, our knowledgeable parts specialists are available to assist you with any questions or concerns. Contact our customer service team at 1-844-734-8539 or email us at [email protected] for any questions.